Use and coordination of thin-walled bearings

With the development of science and technology, like the camera industry, haeundae handheld device, motor and aerospace and other fields pay more and more attention to the bearing of the lightweight and miniaturization, and then the importance of the thin wall bearing.Because thin-walled bearing realizes extremely thin bearing section, it also realizes miniaturization and lightweight of products, such as: 6700ZZ, 6703ZZ, 6800ZZ, 6900ZZ, etc.However, how to use and cooperate thin-wall bearings is also very important.

Thin wall bearing is high precision spare parts, so it should be noted when using some of the details, even with the high performance thin wall bearing, if improper use, or bad cooperation, expected to reach the effect.Therefore, the following details should be noted when using thin-walled bearings:

1. Keep the storage and surrounding environment of thin-walled bearing clean. Even if very small dust enters into the interior of thin-walled bearing, wear, vibration and noise of thin-walled bearing will be increased.

2. Install the thin wall bearing, absolutely not allowed powerful punch, because the groove is very shallow, thin wall bearing inner and outer ring is very thin, powerful stamping words will result in bearing inner and outer circle separation and other damage.Therefore, when installing, it is necessary to determine the range of production and installation clearance with the manufacturer first, and coordinate the installation according to the range of clearance.

3. In order to prevent the thin wall bearing from rust, it is necessary to ensure the storage environment is dry and free of moisture, and the storage space is separated from the ground.When taking out the bearing for bearing use, it is important to wear clean gloves to avoid moisture or sweat sticking to the bearing causing corrosion.

In order to create higher quality thin wall bearing, Shanghai yu continuous bearing co., LTD has been committed to the production and manufacture of thin wall bearing, to improve manufacturing standards, including accuracy, noise and vibration, etc.Accuracy requirements for the lowest P6 level, noise and vibration are generally Z2V2 group and above, so as to meet the needs of more customers.

• Shanghai Kun Jing Bearing Co., Ltd.