Control table of common material properties of bearing
Technical data | Company | GCrl5 | 9Crl8 | Si3N4 | Zr02 |
p Density | g/cm3 | 7.8 | 7.9 | 3.2 | 6 |
a Coefficient of expansion | 10-6/ degree | 11 | 17 | 3.2 | 10.5 |
IE modulus of elastcity | GPa | 208 | 200 | 320 | 210 |
u Poisson ratio | 0.3 | 0.3 | 0-26 | 0.3 | |
HV Hardness | Mpa | 800 | 700 | 1700 | 1300 |
oBFlexural strength | Mpa | 2400 | 2600 | 900 | 1000 |
Compressive strength | Nm/cm2 | ||||
Kc Impact strength | W/mk | 20 | 25 | 7 | 11 |
λ Thermal conductivity | mm2/m | 30-40 | 15 | 3.5 | 3.5 |
Ω specific resistivity | J/KgK | 1 | 0.75 | 1018 | 1015 |
specific heat | degree | 450 | 450 | 800 | 400 |
MAX permissible sewice temperature | 120 | 150 | 1000 | 800 | |
anti?corrossion | none | weak | strong | strong | |
NO.of stress circle(50%destroy) | 10*106 | 10*106 | 50*106 | 50*106 | |
Destroy model | peel off | peel off | peel off | peel off/break | |
Anti?magnetism | none | none | good | good | |
Dimension stability | not good | not good | good | good | |
Insulate properties | not good | not good | good | good |